Development of the Uzi Family: Standard, Mini, and Micro
Forgotten Weapons
•
28m
The Uzi was originally designed in the 1950s, and it was on the technological cutting edge at the time. The stamped receiver, telescoping bolt, and compact magazine-in-grip layout made it an inexpensive and effective weapon. Its sedate 600 round/minute rate of fire helped as well, making it easy to shoot effectively. Uziel Gal experimented with a compact version at that time, but dropped the idea when he proved unable to make a smaller version with the same low rate of fire as the standard pattern.
Fast forward to the late 1970s, and the designers at IMI revisited the idea of a compact Uzi. They were willing to accept the increased rate of fire of a shorter receiver and lighter bolt, and their first prototypes were ready in 1978. full export sales began in 1980. The gun was advertised as having a 900 rpm rate of fire, but the reality was much higher.
The final step of classic Uzi development was the Micro Uzi, introduced in 1986. This was actually developed form the semiautomatic, closed-bolt Uzi Pistol made for American commercial sales. That pistol was given a select-fire trigger group and a folding stock, and it became a micro-compact submachine gun for only the most tactical of operators. It was advertised as having a 1200 rpm rate of fire, but this was again underestimated to improve sales.
In reality, the standard Uzi does fire at about 600 rpm. The Mini (in closed-bolt form) ran at 1300+ in my testing at S&B, and the Micro was over 1400 rpm. Where the original Uzi is best kept in fully automatic mode and can easily fire single shots when desired, the Mini and Micro Uzis are definitely best suited to semiautomatic use. Firing them in fully automatic is a much more difficult proposition if one wants to maintain any level of accuracy and situational awareness.
Thanks to Sellier & Bellot for giving me access to this set of Uzis to film for you!
Up Next in Forgotten Weapons
-
You Can Copy Anything: Chinese Bolt A...
This is a copy of the M1 Carbine made in China late in the Chinese civil war - likely between 1945 and 1949. While there was an attempt at factory production of a true M1 Carbine copy in northern China later, this example is actually a bolt action which simply copies the look and handling of the ...
-
Praga I: A Blow-Forward Bullpup Semi-...
The Praga I was the first machine gun design from noted Czech arms designed Vaclav Holek. Three examples were made for Czech military testing in 1922, but they were not acceptable. Instead, this design served as the first stepping stone to the eventual development of the ZB-26, perhaps the best o...
-
Leaning Westward: Galils for Estonia
When Estonia regained its independence from the Soviet Union in 1991, it was initially armed with a wide variety of miscellaneous small arms. They clearly needed a primary standardized rifle for the new armed forces. The one definitive criteria for making a selection was than the new rifle must b...