Today, I thought it would be fun (or at least interesting) to shoot a 2-gun match in a reproduction World War One gas mask and helmet. Specifically, a
French M2 pattern, which was used extensively by French, British, and American troops. I paired this with an Adrian helmet, a Lebel rifle, and a...

The PP-19-01 Vityaz is a development of the PP-19 Bizon, a submachine gun developed by Izhmash at the request of the Russian Interior Ministry in the early 1990s. The Bizon design team included the sons of both Mikhail Kalashnikov and Evgeniy Dragunov, and they created a well-designed unlocked bl...

Today I have Kalashnikov USA's KP-9 (which is a virtually exact semiauto copy of the Vityaz SMG) out at the range. I chose the most suitable ammo to try it out with; slightly rusty steel-case Tulammo. And it just ate it all up. The KP-9 does not have the best trigger or the lightest recoil (altho...

The “MARS” pistols made in Czechoslovakia began with the “Slavia” line, designed by one Antonin Vilímec in 1920 or 1921. Those were basically simple copies of the vest-pocket Browning pistols, and were made until 1935. At that point the factory (shop?) was acquired by the Kohout & Spol company, w...

I am often asked how a C&R license (Curio & Relic, also called a Type 03 Federal Firearms License; not to be confused with "Class 3") affects the purchase of a machine gun. So, I put the question to John Keene, NFA specialist for the Morphy Auction Company...

The short version is that a C&R li...

The original "Hush Puppy" was a Smith & Wesson Model 39 pistol fitted with a suppressor for use by Special Forced in Vietnam. The name came back in the 1980s, when the US Air Force requested a suppressor for use with the M9 Beretta in its pilots' survival kits. Knight's Armament developed a desig...

Roller locking is a system that is not used in many guns and often confused with roller-delayed blowback - which is understandable, given the similarities between the systems. Roller locking is really a sub-type of flapper locking mechanism. It was most significantly used in the MG42, and also in...

Roller delayed blowback originated in the Mauser company R&D department when engineers were attempting to design a roller-locked version of the G43 rifle. They found that when the bolt bounced in automatic fire, the system would sometimes work without being fully locked. With some refinement, thi...

I have had a bunch of people ask me what the process is for legally importing firearms into the US. I have gone through this process now a couple times over the past few years, and I think I have a good enough understanding to give you an overview. If you are interested in importing a firearm, th...

The introductory clip was from my interview with Tony Neophytou, a talented and successful South African firearms designer (his work includes the Neostead 2000, Inkunzi PAW, and NTW-20 rifle). He doesn't mince words; it's a very difficult field to succeed in - and I regularly get inquiries from h...

H&K introduced the UMP (universal machine pistol) in an effort to attract sales from American law enforcement by offering a modern submachine gun in .45 ACP and .40 S&W calibers. The MP5 was and remains an extremely popular SMG, but it has never been made in .45 caliber, and that was seen as a po...

Introduced in 1968, the HK33 was Heckler & Koch's adaptation of their roller-delay operating system to the 5.56mm / .223 Remington cartridge. In addition to the standard full-length rifle (with a 15.35 inch barrel) a shorter version was made as the HK33K (with a collapsing stock and 12.4 inch bar...

The High Standard company only made on .45 caliber pistol, and it was an improvement on the Grant Hammond pistol tested by the US military during World War One. After his gun's rejection by the military, it appears that Grant Hammond took the design to his friend "Gus" Swebelius who ran High Stan...

The Hollywood-spawned mythos of the M1 Carbine is that it was created by David Marshall "Carbine" Williams. The reality is far different. In real life, Williams was talented, but short-tempered, stubborn, and unable to work effectively as part of a team - and a cohesive, cooperative team is what ...

"Into Helmand With the Walking Dead" is a newly released memoir of the war in Afghanistan, written by my friend Miles Vining (whom you may recognize from Silah Report, among other places online). It is an intimate look at one Marine's experience from enlisting right out of high school, going thro...

Today, we are taking the PGM Precision Hecate II out to the range. It is a rifle designed for use out to 1800m, but I have neither the skills myself nor the range facility to do something like that - instead I have a target set up at 200m.

I was quite surprising by just how soft-shooting the ...

Is the G36 a great rifle unfairly maligned? Or is it mealy and inaccurate? Let's look at the question, and find out what was really going on with the Great G36 Controversy.

The FR-F1 was adopted in 1967 as the French Army's marksman or sniper's rifle. It was based roughly on the MAS-36 bolt action system, but with a heavier receiver and 10-round detachable box magazine. It used the same scope as he MAS 49-56; the APX L806, a 3.85x optic largely modeled after the Ger...

France was in an interesting position during World War One of being a primary supplier of rifles and machine guns to its allies, but a major importer of handguns. In addition to a great many Spanish pistols of several types, the French government purchased both revolvers and Government Model 1911...

When St Etienne developed the FR-F1 sniper rifle, all the branches of the French military were given the opportunity to purchase them - and the Army, Navy, and Gendarmerie did. The Air Force, decided that it didn't need any, though. Until about 20 years later, when they decided that they did, in ...

Italy was the first major adopter of the Maxim heavy machine gun and had several hundred by 1914 - but wanted to have a domestic design in production as well. The Italian government and military put a lot of resources into the Perino machine gun, but kept it so secret that it was never properly t...

The FAMAS rifle was originally adopted for use with 55 grain ammunition, with a 1:12 inch rifling twist rate and, of course, a proprietary 25-round magazine. This was the F1 pattern. Further development of the rifle with an eye toward international sale led to the G1 pattern, with a 1:9 inch twis...

Unlike most countries that adopted bullpup rifles, the French military never had a short-barreled version of their standard FAMAS. However, GIAT created several prototypes as part of their (ultimately unsuccessful) effort to market the FAMAS internationally. Today, we have two to look at, both wi...

I found this online and it was unusual enough I figured it would be a fun video to put together for you.