8mm M1915 Chauchat Fixing and Range Testing
Light MGs
•
8m 45s
Well, my 8mm French Chauchat finally cleared transfer, as did my application to reactivate it. This was a "dewat", or "Deactivated War Trophy" - a machine gun put on the NFA registry but modified to be non-firing. This is not the same as legal destruction, as the receiver of the gun remained intact. The method of deactivation on such things can very significantly; in this case the chamber was plugged with weld, the bolt face welded up, and the barrel extension welded to the receiver. I did have an intact spare bolt and barrel assembly, however.
I removed the weld holding the barrel assembly in place, cleaned it up a bit, and dropped in my new parts.
Legal note: this was done after the receipt of an approved Form 5 from ATF, complete with tax stamp.
Today I took it out to the range for the first time, to see if any further work would be needed. And yeah, there was a bit of tweaking necessary. The feeding and extraction are solid, but the ejection requires some work. So, after swapping in a better extractor, I headed back to the range for another test run.
This time is ran great, with the exception of one bad magazine (3 of 4 being 100% reliable is better than I expected, given their age and construction). So now, I have a fully functioning Chauchat and three known-good magazines. Next up? Two-gun match! Stay tuned...
Up Next in Light MGs
-
M1915 CSRG Chauchat
We have a brief video from a friend of the Forgotten Weapons site showing a standard M1915 Chauchat in use. Although short, the video does a good job of showing the gun's rate of fire and general operation. You can see the open magazine design that caused so much trouble, and see how the heavy re...
-
Swiss LMG25 Light Machine Gun
This week, we will be featuring all Swiss weapons here at Forgotten Weapons. Kind of like Shark Week, but more land-locked. We'll kick off today with a video showing you around a Swiss LMG-25 light machine gun we found for sale at Cornet & Company in Brussels (a better gun shop than any I've foun...
-
The MG34 Lafette Mount
We met up with Greg - who runs Allegheny Arsenal - at a gun show a couple weeks ago, and this is the first of a couple interviews we did with him on the MG34 and its mount. Greg can do anything that needs to be done to a Lafette mount, and stocks all the parts you'll need to get your 34 running a...
