Canadian Ross MkIII Sniper Rifle with Warner & Swasey Scope
Bolt Action Rifles
•
10m
The Canadian infantry that went to Europe in the early years of World Wa rOne were equipped primarily with the Ross MkIII rifle. The Ross would become quite the scandal, and was replaced in service with the SMLE in 1916 - but as a sniper rifle the Ross excelled. Its problems in service were largely based on poor quality ammunition, and this was not an issue for the sniper corps. In addition, Great Britain was having enough trouble equipping its own snipers to have any extra scoped rifles to hand over to the dominions.
And so, the Canadians modified 500 Ross rifles into a sniper configuration using American-sourced Warner & Swasey M1913 "Musket Sight" scopes. These were 5x magnification prismatic scopes, also used by American forces on the M1903 sniper rifle and the M1909 Benet-Mercie machine guns. The scope was not very good, suffering from fogging and other issues, but it was available. The Canadian rifles were made in two batches of 250 each, one in 1915 and one in 1917. This was actually more rifles than needed, and many of them (including the two in this video) remained in Canada for training (and were used at least until 1942).
Canadian Warner & Swasey scopes can be identified by three elements. They have elevation dials marked out to 2400 yards, serial numbers between 1 and 500, and no data plate on top. Canadian scope cases are marked with the serial numbers of the scope and the rifle they were issued with.
Up Next in Bolt Action Rifles
-
Czechoslovakia Recycles Mosins: The v...
Czechoslovakia adopted a whole new slate of small arms in the 1950s, including the vz.52 pistol vz.52 rifle, and vz.52 light machine gun. They also adopted a new sniper rifle, developed by a Moravian designed names Otakar Galaš. Galaš was a skilled competitive shooter as well as an arms designer,...
-
French FR-F1 Sniper Rifle at the Range
The FR-F1 was adopted in 1967 as the French Army's marksman or sniper's rifle. It was based roughly on the MAS-36 bolt action system, but with a heavier receiver and 10-round detachable box magazine. It used the same scope as he MAS 49-56; the APX L806, a 3.85x optic largely modeled after the Ger...
-
PGM Hecate II: A Battle-Hardened .50 ...
Courtesy of PGM Precision USA, we have a chance to take a look at a Hecate II sniper rifle today. This rifle's story begins with the Ultima Ratio, a classic-based 7.62mm precision rifle designed by Gilles Payen in France circa 1991 for the French RAID police unit. The rifle was very well-received...
