M91/41: A Step Back From the M38 and the Last Carcano
Bolt Action Rifles
•
9m 30s
In my opinion, the M38 Carcano as a very insightfully designed infantry rifle for World War Two, acknowledging the real-world use conditions of such weapons. With the M91/41 (aka M41), Italy took a step back from that. Originally designed as the M40 in 1940 with a new rear sight design adjustable out to a reasonable 500m, it was adopted in 1941 with a copy of the original M91 carbine rear sight, graduated out to 1000m. The barrel was shorter than the M91 rifle, but only by about 3.5 inches. It had a straight bolt handle, and sling attachments on both the side and the bottom.
The M41 was produced at the Terni Arsenal until September 1943, when Italy signed an armistice with the Allies. Production also took place at Armaguerra in the north, and that factory was controlled by German forces after the armistice, and would continue producing rifles in 1944. A total of about 917,000 M41 rifles were made between the two factories.
Up Next in Bolt Action Rifles
-
M38 Carcano: Best Bolt Rifle of World...
During the 1920s, Italy was concerned about insufficient lethality with their 6.5x52mm cartridge, and began experimenting with larger bore diameters. By the late 1930s they settled on a new 7.35x51mm round, based closely on the existing 6.5mm cartridge case. They also planned to replace the origi...
-
Special Troops M91 Carcano Carbine an...
"Special Troops" does not mean Special Forces; it means all the various service branches that need neither a full length rifle nor a permanently attached bayonet. This included artillery, engineers, naval troops, and more. The Moschetto 91 TS was basically a carbine-length Carcano rifle, albeit w...
-
Curtis 1866: The First Bullpup - with...
Sorry for the poor audio quality - today I am back at the Cody Firearms Museum talking to Jonathan Ferguson, Keeper of Firearms & Artillery at the Royal Armouries in the UK. Jonathan has written a new book on the history of British bullpup firearms, which Headstamp is very proud to be publishing!...
