Spanish FR-8: the "Cetmeton"
Bolt Action Rifles
•
9m 19s
The FR-8 is a Spanish rifle manufactured in the 1950s as part of Spain's adoption of the CETME semiautomatic rifles. Spain was not only moving to their first semiauto rifle, but also changing from 8mm Mauser to the new 7.62mm NATO. It was not possible to immediately equip everybody with the new rifles, so a parallel program was instituted to modify the now-obsolescent bolt action rifle in inventory into a more useful configuration.
FR-8 was the designation for an M43 Mauser (of the model 98 pattern) rebuilt as a training and second-line rifle. The original barrel was replaced with a 7.62mm barrel , along with a front sight duplicating that of the CETME. Where the CETME had a charging handle tube above the barrel, the FR-8 had a similar hollow tube below the barrel, which was used for storing a cleaning kit. The rear sight was similarly modified to duplicate the CETME sight picture and range adjustments. A muzzle brake was fitted so that standard 22mm NATO grenades could be launched (a further benefit for training compatibility).
Contrary to popular misconception, the FR-8 was designed to be used with normal full-power 7.62 NATO ammunition, not a reduced-charge specialty round.
Up Next in Bolt Action Rifles
-
Swiss Model 1893: A Mannlicher Cavalr...
The Swiss were the first country to adopt a bolt action repeating rifle with their Vetterli, and followed this by changing to a straight-pull design in the 1880s. The straight-pull Schmidt-Rubin system was quite good, but one potential flaw was that it was a quite long action. This became an issu...
-
Japanese Type 100 Paratrooper
The Type 100 (sometimes called the Type 0) was one of the initial Japanese experiments in paratroop rifles. Manufactured from standard Nagoya Arsenal Type 99 rifles, the Type 100 used a set of interrupted lugs at the chamber to allow the rifle to be broken into two short sections. Only a few hund...
-
Spreewerke VG-2
Five different companies in Germany produced designs for the last-ditch Volkssturm bolt action rifles, and they were designated VG-1 through VG-5. The VG-2 was developed by the Spreewerke company, and differed from the others in its use of a sheet metal stamped receiver (and consequently a pretty...
