How Does It Work: Roller Delayed Blowback
The History of Roller-Delayed Actions
•
2m 51s
Roller delayed blowback originated in the Mauser company R&D department when engineers were attempting to design a roller-locked version of the G43 rifle. They found that when the bolt bounced in automatic fire, the system would sometimes work without being fully locked. With some refinement, this became the roller delayed system, and would have been used in the StG-45 rifle if the war had gone longer. After the war, the system was applied to prototype French arms, then to the Spanish CETME program which eventually became the German G3 rifle. The system would see use primarily as the basis of a whole family of arms from Heckler & Koch, although it has been used in a few other places.
Mechanically, the system uses an angled "locking" wedge to put a mechanical disadvantage on a pair of rollers that must retract into the bolt head before it can move rearward. The combination of the wedge angle and the mass of the bolt carrier assembly are carefully calculated to delay the action from opening until pressure is reduced to a safe level. These systems do typically open faster than locked actions, though, and generally require the use of chamber fluting to ensure reliable extraction.
Up Next in The History of Roller-Delayed Actions
-
Roller Locking vs Delay: BotR Addendu...
Since I had the very interesting book Verschlußsysteme von Feuerwaffen which contains the best diagrammatic representation of the difference between roller delay (e.g. HK G3 rifle) and roller locking (e.g. Vz.52 pistol), I took it upon myself to make a little addendum to Ian of Forgotten Weapons'...
-
WW2 Mauser Becomes Heckler & Koch: th...
After the Mp44/StG44 Sturmgewehr was starting to see substantial production and field use, the German military and the Mauser company began working on a way to simplify production of the weapon. The design for the Gerät 06H actually began with the Gerät 03, an attempt to make a roller-locked G43 ...
-
CEAM 1950B: A Roller-Delayed Missing ...
At the end of World War Two, the Mauser factory complex was in the French occupation zone, and more than a few Mauser engineers went to work for the French. Among them were Ludwig Vorgimmler and Theodor Löffler. These two men joined the Centre d’Etudes et d’Armement de Mulhouse (CEAM) and worked ...
